O P E R A T I N G T E M P E R A T U R E:
Ideal operating product temperature range is 70 degrees F to 120 degrees F for performance efficiency. This means if you can de-rust an object at 70 degrees in one hour, it could take up to five hours to do the same object at 45 degrees temperature range possibly.
S A F E T Y:
As with any product no matter how safe it is - reasonable caution- should be exercised to keep out of and away from your eyes. Flush with plenty of water if eyes are contacted at all.
Skin is normally not affected by this product unless you have an open cut, wound, and sore on your skin. .Gloves are still recommended to prevent any possible affects at all.
Product doesn't produce any VOCs (volatile organic compounds) but does have a slight mild odor to it. Color can vary light yellow to golden color depending on storage and temperature.
Clean up of this product requires nothing more than just plain water.
D I P O R S H O W E R:
Decide on what would be the most efficient way to de-rust your item.
Small or large items not attached to anything or that are easy to detach are best dipped. This can be done very efficiently by containing the item in the smallest area possible requiring the least amount of volume of safest rust remover.com to contact the entire surface needed to be de rusted. This can also be accomplished by containing the item in a sling like or diaper like containment boom bag , blocked together with temporary wood sides and a plastic paint tarp for a liner to hold the liquid.
CONTINUOUS SHOWER RECIRCULATION PROCESS:
Ideal for doing large items in place, requires a pump to continuously recirculate the product over the rusted area with a catch tarp of some type to hold enough product in the area to let the pump keep its prime to keep re circulating the product over the area until the rust has all been dissolved. Many different pumps will work, but a $59.00 sump pump from Sears and a garden hose have done everything to date on our website.
P R E P A R A T I O N:
Objects - items - parts - whatever you decide to de-rust, need to be free of mud, dirt, loose rust, grease and oil etc.
Why, because even though the product would overcome the extra dirt, rust, grease and oil and still de-rust your part, you would have shortened the life of its performance greatly. Think of it as gas mileage, by taking the proper prep time you could get 50 miles per gallon or do little or nothing and get 20 miles per gallon. What would you do?
M E T H O D O F A P P L I C A T I O N:
The challenge to de-rust or reverse the aging process of any item or surface is only limited to your imagination and abilities to do so.
The safety factor in Safest Rust Remover.com makes it possible to take on any rust challenge you can find and tackle it with this new amazing product.
W H A T T O E X P E C T:
Each surface dipped or showered should reflect a clean bare metal appearance after treatment. Some surfaces will require a lot longer contact time depending on thickness of rust build up and if the surface you are treating is a cast part or machined part.
A machined surface is smooth and will make it easier for the rust to be removed.
A cast part has a more porous surface and will require a longer contact times to possibly remove all the rust.
Surfaces that have had rust and then had the rust painted over at sometime or another will require paint remover to be used to remove the paint in between the layers of rust. Safest Rust Remover will not take off any rust underneath a painted surface until you remove that layer of paint first.
C O N T A C T T I M E:
Surfaces being de-rusted that need extended contact time to accomplish the rust removal process might experience black carbon steel residue staining temporarily. This happens when the Safest Rust Remover solution starts to get dirty from extended use and the part still needs additional contact time. Parts can have a brand new appearance after de-rusting, but the extra time needed to make it completely free of rust re-deposits black carbon deposits on the part.
S O L U T I O N T O C A R B O N S T E E L S T A I N I N G I S S I M P L E:
When done, spray on any of the Ultra One Product s that they make for cleaning the hydrocarbons stains in the Lincoln Tunnel, either the Ultra One Heavy duty Degreaser or Ultra One G5 degreaser work the best. These products are available on line at the shopping cart. You may also use any other good degreaser available that you might already have, but it might require more scrubbing and brushing than the Ultra One products require.
After spraying degreaser on the item, let set for 30 seconds and then brush it with a brush or scrub sponge and then rinse it off with water.
Immediately after, have some new Safest Rust Remover .com standing by in a spray bottle and mist spray the entire object with the rust solution to prevent any flash rusting.
The fine coating of Safest Rust Remover .com should last indoors up to three months with out re-rusting in proper thermostatically controlled conditions. Outdoor storage will require a proper coating designed for those conditions.
Coating or painting any surfaces after de-rusting should require no more than following the manufactures direction for wiping down the part with their directions and their recommended product for prior to painting or coating. Safest Rust Remover is not a recommended paint able prep surface product.